[rev_slider alias=”spica-knx” /]
Product Code: K.SPI.01G.20N.WO

Description:

The KNX/IP SPICA KNX interface is a Tunneling device that allows to couple an Ethernet line with a bus KNX line. Thanks to its flexibility, the device can
be used as programming interface through the IP Network (even remotely*) and it can manage up to four parallel connections which makes it suitable for
use also as gateway for the supervision systems.
Six LEDs show the exact status of the two connected lines; this helps identify common communication problems due to bus load or retransmissions
on both lines. The device status can also be checked from a dedicated web page (accessible using the device’s IP address and the default port, e.g.
192.168.0.9:8080/). This device is powered by auxiliary power 30Vdc.
*= Requires specific network level configuration (not dependent by Spica KNX device).

DATASHEET FILE
ETS FILE
DRAWING FILE
BIM FILE – COMING SOON
INSTRUCTIONSHEET FILE
PICTURE
CERTIFICATE